How To Attach Patches Without Sewing

Would you like your preferred jacket brand logo to display? Do you wish to show off your children’s talents in their backpacks or jacket at a summer camp? Wanna cover damaged areas without bringing them to a tailor on your clothes?

Jackets, jeans, and purses are a long-standing trend to attach patches. Luckily, this trend doesn’t go anywhere. It is pretty popular among teenagers for their coats, denim pants, school bags, caps, and to exhibit their favorite trademarks. But from this trend, which is an excellent and quirky pastime, it is also a life hack.

These include fabric weight, material composition, care recommendations, patch type, and whether you want to attach it or not constantly. Let’s now look at the sorts and learn how to attach embroidered patches to clothes without sewing.

Think About The Patch You’re Going To Utilize

Let’s be honest: not all fixes are created equal. While some are eye-catching and will receive several comments, others are distracting, large, and may damage your shirt or jacket. In other words, if you want to attach your patches properly, you have to choose the patches you have applied wisely. Before you select a patch, there are a few things to keep in mind.

• What’s the material it’s composed of
• Choose an appropriate design

What Can You Use In Sewing-Free Patches?

For people who want to apply patches without sewing them, there are three typical alternatives. They are the following:

• Iron-On
• Fabric adhesive glue
• Hook and loop tape

You may search the top adhesive materials online and choose the most suited to your budget and demands.

Choosing a Sewing-Free Method to Attach Patches

How Can I Attach Patches Without Sewing?

• Iron-On

Iron-on patches are the most convenient to use. Follow the directions included with the patch. You may use a house iron or heat press.

Also, be sure to follow the care recommendations for the type of fabric you’re using to attach the patch. You are lucky if you have a heat press. Most of them come with patch kits.

STEP 1: Check The Fabric:

You have to make sure the patch is as broad as the cloth to adhere to a patch through ironing. The result may not be the best if the material does not match. Your fabric should also be iron-resistant.

If your cloth contains a label that says it can’t press, you might want to examine your options. But if your fabric says nothing, you have to find out for yourself or ask the professionals whether your cloth is ironable.

Avoid silk, polyester, and other sensitive fabrics; they may be burned or discolored by extended iron heat.

STEP 2: Placement:

Choose where to apply the patch and straighten up the fabric.

STEP 3: Lay Down The Cloth:

On an ironing board or a flat, equal surface, place the fabric.

STEP 4: Put The Patch:

Position the patch’s sticky side on the fabric, ensuring it’s in the appropriate place and correct proportions.

STEP 5: Preheat Your Iron:

The temperature should not be higher than your cloth or patch can withstand. The water and steam settings should be disabled.

STEP 6: Use Protective Towel:

Place the towel or any thick material in the fabric with the patch attached. The use of a towel is to preserve the environment of the towel from ironing. However, make sure it doesn’t change the position of the patch when you lay the towel over the fabric.

STEP 7: Iron:

Put hot iron on the area for around half a minute and keep it firmly. Press on, but stabilize your hands.

STEP 8: Check:

Remove the towel and iron to ensure that the patch is correctly put. If you detect a lifting of the edges, iron the fabric over again until the patch properly adheres.

If the patch ever removes in the future, use glue or any other way to apply it again.

• Fabric Adhesive Glue

Many patches may attach to different fabrics with glue. But you must use the correct glue to avoid damaging the material or the patch. Fabric adhesive is the most acceptable option since it is quick and easy to use.

STEP 1: Positioning:

Decide where the patch is going to place.

STEP 2: Lay Down The Cloth:

Place the fabric on a flat surface, such as an ironing board.

STEP 3: Apply Glue:

Apply the glue on the patch’s backside with care.

STEP 4: Apply Glue On Fabric:

Apply the glue on the fabric where you wish to adhere to the patch with care.

STEP 5: Put The Patch On:

Place the patch on the garment and firmly press it in place. Make sure the adhesive doesn’t run out the sides.

STEP 6: Take A Break:

Allow a minute for the adhesive to cure before removing the clothes. After 24 hours, the fabric may be cleaned or used regularly.

• Hook And Loop Tape

Hook and loop tape, often known as velcro, is a suitable alternative for applying a detachable patch. This fastener divides into two parts.

The fabric is adhered to half of the tape, while the reverse patch is attached to the other half. Choose velcro that has a self-adhesive backing. Otherwise, you will have to use a needle and thread.

STEP 1: Cut The Tape:

Cut out the correct size of the adhesive tape (Velcro) for the patch. If the patch is rectangular or square, velcro should cut to that exact size; however, if the patch isn’t of any formal design. You can cut velcro in a circular shape that will cover most of the patch. The stronger the connection, the more tape you apply.

STEP 2: Stick:

Peel the lining off and attach it to the tissue.

STEP 3: Wait:

Before using it, wait for at least 24 hours.

This tutorial will show you how to put a patch on a jacket without sewing.

Conclusion

I hope you’ve learned how to use the gluing, ironing, and stick-on Velcro methods to apply patches without sewing. To ensure that your patch project turns out wonderfully, carefully follow the procedures and processes.

It might be difficult, but it saves you from your cloth or accessory’s being ruined. And don’t try to wash your patched clothing too often, so the patch will last years.